Description
ANT-201 grey cement powder ceramic tile binder it is a kind of portland cement based adhesive,it is applicable to indoor and outdoor concrete wall, as well as the cement- mortar rendered wall, it has excellent bonding property and water resistance,
it is very ideal for pasting the tiles on the swimming pool.
Technical performance
1,excellent binding property 2,perfect weather resistance
3,good crack resistance 4,permanent heat resistance 5,easy to use
Scope of use
Used for indoor and outdoor ceramic tiles and mosaic tiles.
Base Surface Preparation
The base surface should be solid, smooth, no crack, remover and other attachments, it should be repaired evenly one day early if the base surface is uneven.It should be wetted slightly if the base surface is porous or temperature of it is too high.
Application
1, pour the water into clean vessel and mix with the adhesive and stir at the same time until it becomes uniform thick paste, keep it still for 5 to 8 minutes,
(the mixing ratio of adhesive to water is 25kgs to 6.0-6.5kgs),stir again and no need to add water before using of this product.
2, plaster the adhesive on the base surface by dentiform steel trowel (the size of dentiform steel trowel for ground is 8x8x8mm, and it’s 6x6x6mm for wall), cut it into dentiform stripes,compress tightly the tiles on the adhesive in order to avoid hollowing,adjust the tile’s position in 10 minutes to reach the best effect.
3, plaster the adhesive on the back of tiles,paste them on the base surface, the volume of usage for the adhesive depends on the degree of roughness of base surface, as well as the groove size of tiles.It takes about 3.5kgs to 5.5kgs per square meter if the thickness is 2.0 to 3.0mm.
Please note
1,construction temperature is 5°C-35°C,please don’t construct in rainy day or under the blazing sun.
2, thickness of bonding layer should not less than 1.5mm,the ready mix paste should be used up within 2 hours.
3, interval between adhesive work and other works should be 24 hours.
4, this product contains alkali, please be careful of your skin and eyes. Please refer to the instructions of our products or contact with us.
Storage and packing
This product can be stored for 9 months under seal in cool and dry place. packing: 25 kgs/bag,24 tons per 20ft. container.
Delivery time: 4 days after the receipt of deposit.
Payment Terms:T/T or L/C.
